Drops of Balance® is made in our manufacturing facility here in Colorado, USA according to GMP standards.
Drops of Balance® is an all-natural water purification solution that safely and effectively purifies water. Its unique, patented formulation of ionic sulfate minerals (electrolytes) neutralizes and assists in the reduction and removal of over 250 harmful contaminants from water providing you with cleaner, healthier, better-tasting drinking water.
Drops of Balance® also contains up to 80 trace minerals including alum, cerium, chromium, cobalt, copper, lanthanum, lithium, nickel, rubidium, scandium, selenium, silicon, strontium, sulfur, titanium, and vanadium. As a natural substance, the mineral composition can vary slightly.
Drops of Balance® purifies water in a 4-step process:
Watch our "How Drops of Balance® Works" video!
Drops of Balance® is certified according to EPA and NSF/ANSI standards (when applicable) to eliminate or reduce over 250 contaminants from water.
Drops of Balance® eliminates or reduces agricultural chemicals like pesticides and herbicides, industrial chemicals like BPA and PCB's, disinfectants and disinfection byproducts like chlorine and trihalomethanes, heavy metals like lead and mercury, microorganisms like bacteria and viruses, and pharmaceuticals like mood stabilizers and antibiotics.
All testing has been completed by an independent, EPA-certified laboratory according to EPA & NSF/ANSI standards (when applicable). View lab tests.
*Please note that contaminants mentioned are not necessarily in your water source. You'll need to contact to your local municipality to understand what contaminants are in your water.
Yes. Drops of Balance® traps 100% of the fluoride ions and reduces the concentration of sodium fluoride below the detection limit of EPA method 340.2.
Drops of Balance® is made in our manufacturing facility here in Colorado, USA according to GMP standards.
Drops of Balance® does not have an expiration date. Stored properly, it will remain effective indefinitely.
You can use Drops of Balance® to purify any water except salt water; this includes, but is not limited to, distilled water, reverse osmosis water, alkaline ionized water, toilet water, rain water, river, lake, or pond water, or any other freshwater source.
Our 16-ounce and 32-ounce bottles are made of food-grade, high-density polyethylene (HDPE) #2 plastic. We chose this material for our larger bottles because it's one of the safest plastics with no known health concerns, is BPA-free, and easy to ship and recycle. Our small 2-ounce bottle is glass. All of our bottles are made in the USA.
Here is a price breakdown for how much a gallon or liter of Drops of Balance® purified water costs based on retail prices:
Remember, these are retail prices. You can receive monthly discounts by signing up to our mailing list.
The Drops of Balance Ceramic Filtration System removes particulates and fine sediment and reduces any microorganism down to 0.2 microns in size, bad odors, tastes, and other organic compounds.
Combined with Drops of Balance®, the Drops of Balance Ceramic Water Filter reduces over 250 contaminants including pharmaceuticals drugs, agricultural and industrial chemicals, heavy metals, disinfectants, disinfection byproducts, and microorganisms to a concentration less than or equal to NSF/EPA permissible standards.
When used in conjunction with Drops of Balance®, the Drops of Balance Ceramic Water Filter reduces the concentration of sodium fluoride below the detection limit of EPA method 340.2.
Yes. The Drops of Balance Ceramic Water Filter is made of food-grade high-density polyethylene (HDPE) #2 BPA-free plastic.
The top tank holds 1.3 gallons (5 liters) and the bottom tank holds 2.6 gallons (10 liters).
When fully assembled with the bottom base, the Drops of Balance stand 13" B x 23" H. If you remove the bottom base, it stands 11" B x 18" H.
The filter in the top tank is composed of highly compressed ceramic with an absolute pore size of 0.2 microns in diameter while most bacteria and protozoa are 0.5 – 1.0 microns in diameter. It's the filter’s first stage of filtration as it traps bacteria, protozoa, particles, and other contaminants from entering the 4-Layer Earth Filter in the bottom tank for further filtration.
The filter in the bottom tank is composed of four layers of activated carbon, zeolites, silica sand, and ion exchange resin that trap bacteria, protozoa, and other contaminants and help reduce bad odors, tastes, and other compounds.
Activated Carbon has been used since ancient times (1200 BC) to purify water. Activated carbon is “activated” by heat and oxygen to create a high surface area that absorbs a broad range of contaminants frequently found in water.
Zeolites are microporous, aluminosilicate minerals with a unique cage-like structure that makes them useful in many ways, especially in water filters. Their ion-exchange and absorption properties are used to reduce odor and clean heavy metals and other natural compounds from water.
Silica sand is commonly used in water filters because of its highly absorbent qualities to remove granular contaminants, suspended solids and colloids.
Ion Exchange Resin
In water purification, ion exchange resin is used to remove poisonous and heavy metal ions, replacing them with more harmless ions, such as sodium or potassium.
The amount of Drops of Balance® required depends on the quality and type of water being treated. The more contaminants in the water, the more Drops of Balance® you would need to treat it effectively. For most municipal (tap) water, we recommend a dilution ratio of 1:1000.To calculate the correct amount, divide the volume of water by 1000.
Please Note: If the water source is believed to be extremely contaminated by known or unknown toxic substances, proper laboratory analysis will be required to give accurate dilution rates.
Though we highly recommend using the Drops of Balance Ceramic Water Filtration System combined with Drops of Balance® for best results, it is not required. The Drops of Balance Ceramic Water Filtration System is particularly useful filtering the precipitated, neutralized contaminants immediately, making your drinking water readily available for consumption. When not using the Drops of Balance Ceramic Water Filtration System, it can take 24-48 hours for precipitates to settle to the bottom of your water container.
The wait time depends on the quality of the starting water. If the water you're starting with is considered to be microbiologically safe (e.g. distilled or reverse osmosis water), wait 5-15 minutes before drinking. For polluted water, the suggested wait time is 24-48 hours to ensure the neutralization of toxic contaminants.
Yes. Heat will not affect the efficacy of Drops of Balance®. You can use it to treat your water when cooking or making beverages like coffee or tea.
The effects may vary depending on what type of water you're starting with and its level of contamination. You may see:
If you're starting with distilled or reverse osmosis water, there might not be enough contaminants in the water to form precipitates. - Not all chemicals form precipitates. (i.e. Chlorine, volatile organic compounds, and other gaseous contaminants evaporate out of water.) Certain biological contaminants may take longer to treat, and you may not see immediate effects.
Cloudiness or a Change in Color
These are signs that dissolved contaminants are coming out of the solution. Let it sit longer until the contaminants clump together and form sediment at the bottom of your water container.
Pale Yellow Color Throughout the Water
If you've let it sit for 24-48 hours, and it has a pale yellow tinge and has a lemon flavor, you've added too much Drops of Balance®. (This generally happens when treating distilled or reverse osmosis water due to the starting pH.) Reduce the amount of Drops of Balance® by half the next time you treat your water.
What you are seeing is the final stage of Drops of Balance®'s water purification process called deposition or precipitation whereby the precipitates (neutralized contaminants) settle and are deposited as sediment at the bottom of your water container. This sediment is completely harmless and if consumed, will just pass through your body. However, you can use a water filter or pour your water through a cheesecloth or coffee filter to remove this residue.
Yes. Though it may be unpleasant to look at, it is completely harmless and if consumed, will just pass through your body. However, most people prefer to remove it from their water. To remove it, you can use a water filter, pour your water through a cheese cloth or coffee filter, or simply pour the top portion into a separate container leaving the residue in the bottom to discard. You can pour this on your plants instead of down the drain!
Drops of Balance® should be stored in a dry place out of direct sunlight between 40° - 100° F. This is because all plastics begin to break down when exposed to extreme temperatures or sunlight over time.
You can store your purified water in either a glass, stainless steel, ceramic, or HDPE #2 BPA-free plastic container.
You can use Drops of Balance® to purify water for all of your needs:
Download the Filtration Guide and follow the assembly steps
If the filtration system is filtering slower than usual, check to see if it’s time to clean the Drops of Balance Micro-Ceramic Filter or if more water is needed in the top tank; because the system is gravity-fed, the more water in the top tank, the faster it will filter.
Clean your filter tanks every few months or as often as needed. Wash with warm water and mild soap. Rinse thoroughly.
Store your filter in a cool, shady place. Don't keep your filter in bright sunlight, since the bright light and warmth helps algae grow. Algae spores are in the air and may be present in your tap water. The blue/green algae most commonly seen is not harmful to your health, and it can be removed from your filter system with a proper cleaning of your system.
Clean your Drops of Balance Water Filtration System thoroughly using mild soap and warm water. Do not clean in Dishwasher.
Shopping at www.DropsofBalance.com is fast, easy, and secure. Placing an online order requires just a few steps: Just click 'Add to Cart' on any items you want to purchase. You can then continue shopping or go directly to Checkout. Once you've finished shopping, click on the Checkout button after reviewing your cart and follow the Checkout steps. You will receive an email confirmation of your order that includes your order number.
Yes. To place an order over the phone, please call us at 1 (855) 362-9466. (M-F, 9-3PM EST).
Most orders are processed and shipped within 24 hours barring any order discrepancies such as address, other vital shipping info or qualifications. Any order placed after 12noon Friday will most likely ship the following Monday.
Most orders ship within 24 hours. Any order placed after 12noon Friday will most likely ship the following Monday. Depending on Carrier shipping time is anywhere between 2-5days. Hawaii and Alaska allow added time. We will send your tracking number so you can follow the shipments progress.
Currently, we use the USPS and UPS.
All prices are in USD